Quiet Zone insulation batt
Owens Corning Quiet Zone® acoustic batt are acoustically designed to control noise transmission between rooms, absorbing sound vibrations within the wall cavity to control noise in your home. They provide excellent in-place acoustical performance, and are as easy to install as regular insulation. Depending on the construction method used, QuietZone® acoustic batts can improve Sound Transmission Class (STC) ratings by 4 to 10 decibels. They’re ideal for home theaters, family rooms, home offices, kitchens, bedrooms and laundry rooms—wherever noise control is needed.
*Accepted acoustics standard is that a 10 dB increase doubles perceived sound and a 10 dB decrease halves it. QuietZone® offers a 6 dB increase in sound reduction, which equals a 30% decrease in perceived sound.
Mass loaded vinyl is a specialty developed layer product offering superior soundproofing. Mass Damper sheet offers STC Ratings up to 53, It is a low cost material used for a variety of marine and land based building room soundproofing. The drawings below shows ML Vinyl installed as a suspended Mass barrier. This typical application would improve transmission loss between adjoining room spaces "Residential mass barrier". The combination of the damping and stiffness properties of Mass gives it excellent performance as a combined layer and damper when applied to partition panels and lightweight structural bulkheads, reducing room transmission of both airborne and structure Borne noise attenuation. Application direct to panels is best done with pre-applied pressure sensitive adhesive (PSA) backed up by minimal fasteners or staples. Ideal product for sound studio music room, Residential soundproofing, garage, basement and recording studio and much more.
UL 94 HB Pass
FMVSS 302 Self Extinguishing
Tolerances are 0 +/- 1/8" for width.
Distribution points in the following states:
MN, KS, OK, AL, IL, OH, WI, PA, VA, TX, AZ, MO, CA, FL, GA, LA & MA.