Ventura PowerLED Bi-Color, 10-30VDC, Stainless Steel, 2 x 3W high flux LED, Warm White/Red

Ventura Power LED Bi-Color, 10-30VDC, Stainless Steel, 2 x 3W high flux LED, Warm White/Red

---

The Ventura bi-color offers a full-brightness warm white LED that will match other Ventura PowerLED spots in both style and light output with the addition of a secondary color. The white LED is fully-dimmable with the use of our PWM dimmer and a momentary switch. A remote three-position switch may be used to toggle between the two different LED colors and full off. This light is ideally suited for the helm area and nighttime navigation.

 

Features & Benefits: Ultra flat stainless steel bezel High lumen output Solid-state circuitry Minimal power consumption Completely sealed LED sub-assembly Integrated drive electronics (no external driver) Combines a fully-dimmable white LED with a secondary color

 

 

Product Details

Trim Ring Finish: Stainless steel Trim Ring Material: Stainless Steel Lens Material: Frosted glass Trim Ring Diameter: 3.18" (81mm) Cut-out Diameter: 2.55" (65mm) Recessed Depth: 1.14" (29mm) Voltage: 10-30VDC Input Power (Watts): 5.5W (White mode) 2.5W (Red mode) LED Engine: 2 x 3W Warm White Cree LEDs 2 x .3W Red Luxeon LEDs Beam Angle (FWHM): 83° Correlated Color Temperature (CCT): 2800K Color Rendering Index (CRI): 83 Lifetime Hrs (70% lm): 50,000 hrs (70% light output) Electrical Protection: Spikes (up to 200V)/Transient Protection Dimmer Module: See ILIM80101 Mounting Method: Spring-Mount Wire Size: See Chart Ingress Protection: IP65 Manufacturer: Imtra Weight: 0.340 lbs.