Boat Dolly Carts


Boat Show Dolly's - Pontoon Dolly - Jet Dolly - Jet Cart - Outboard Storage Racks
              Stern Drive storage Racks - Stern Drive Installers - Engine Stands - Power boat dolly - outboard motor caddy

Marina Boat Hydraulic Jacks  

Key Benefits:
  • Work station for bottom repair and cleaning
  • Trailer rolls in or out past jacks, allowing you to take boats on or off trailers easily
  • Jacks have a safety lock allowing boats to be left on jacks indefinitely
  • Jacks can be used on dirt, gravel, black top or cement
  • Jacks can be used anywhere: shop, yard, showroom
  • Lifts boats up to 40,000 lbs. (with 4 jacks)
  • 10 minute boat placement
  • 20" vertical lift
  • Lifts big boats right off the transport truck
  • Allows fast and easy trailer to trailer exchange
  • Expedite boat show setup. No waiting for a crane

 

Set Includes:

  • 4- Jacks

  • 4- Straight Arms

  • 4- 10" Drop Arms

  • 4- 4" x 18" Contact Pad

 

   MJ Boat Dolly System

Key Benefits:
  • Designed to accommodate most hull configurations
  • Quick pitch adjustment for frames and height and/or width allows a firm seat for the hull to the pads without strake interference
  • Specially designed pads limit the side to side pitch movement alleviating physically holding the pads in position during boat placement
  • Crowned all steel casters are used to give maximum ease of rolling & dependability  in most environments.
  • Equipped with roller bearings and grease fittings on each wheel and king pin assembly
  • MJ units can be linked together to meet specific weight capacities
  • Also available on MJ units are polyurethane casters for the showroom, where floor protection is a concern. 
  • ED36 Dolly comes with 6" x 2" hard phenolic casters (Great casters for shop or showroom)

Specifications:

  Part #
MJ10
MJ48
ED36
  Part Name
Mega Dolly
Showroom Dolly
Economy Dolly
  Extended Width

97"

63"

42.5"

  Retracted Width

65"

42.5"

33.5"

  Extended Height

32.5"

27"

20.5"

  Retracted Height

24"

19"

14.5"

  Capacity
10,000 lbs
4,800 lbs
3,000 lbs
 

Pontoon Dolly
Key Benefits:
  • Self centering dolly used in sets of four (4)
  • For all sizes of pontoons
  • 5" x 2" swivel casters
  • Low profile, gets boats close to ground for display

 

  

 

 JT2 - Jet Ski Dolly

Key Benefits:

  • Now you can move personal watercraft around the showroom to change displays daily
  • Manufactured with heavy steel construction
  • Jet Dolly has four 6" industrial casters with Yardarm's sturdy bracket
  • Enables dealer to move personal watercraft from shop to showroom in a snap

JT1 - Jet Ski Cart

Key Benefits:
  • Yardarm's personal watercraft Jet Cart is designed with the boat dealer in mind
  • Manufactured with heavy steel construction
  • Painted wood bunks run the full length with carpet for hull protection
  • Two 12" pneumatic tires
  • Push-pull handle
  • 2" coupler and tounge
  • 600 lb. winch
  • Jet Cart allows one man operation for loading and launch of personal watercraft
  • Yardarm's Jet Cart is built to last for the service shop

 

Outboard Storage Racks

 
OBR Outboard Motor Storage Rack
  • Built with a stable 60" x 24" wheel base
  • Ample room for several outboard motors
  • Holds up to 2,000 lbs.

 

SR3 STERN DRIVE STORAGE RACKS


 

  • Holds 3 stern drives
  • Perfect size for that small corner in your shop or showroom

 

 
SR5 Stern Drive Storage Racks
  • Holds 5 stern drives
  • Keeps shop looking neat and clean
  • Protects drives from being scratched and damaged

 

 SR9 Stern Drive Storage Racks
  • Special two-tier design holds 9 stern drives in less space than would normally be required
  • Frees up valuable space in your shop or showroom

 

Stern Drive Installers

O5 - Stern Drive Installers Shop Use
Two front pneumatic tires and a single rear caster		 JO6 - Stern Drive Installers Rugged Yard Use
Four air ties allow for rugged yard use		 JO6HD - Stern Drive Installers Heavy Duty Use
Built with extra long clamping arms and wheel base, plus heavy duty lifting capacity for those extra heavy drives. Also works great on dual prop drives.

Work Stations

WS2 - Work Station
  • Holds drives by upper or lower cavitation plate
  • Hand tighten with spanner handle
  • Stern drive head adjusts from 3" to 13" of usable width
WS3 - Work Station  Accommodates:
  • TRS, Bravo, Alpha, etc.
  • DMS, Cobra, etc.
  • Volvo Penta
  • Yamaha
  • Also holds large and small outboard gear cases
  • Also available with outboard mounting plate
  • NEW power head holder attachment available that will accommodate most power heads

Engine Stands

ES1

  • Holds motors by mounts so motors can be completely rigged and tested on stand
  • Holds big block and small block Chevy's & V-6's
  • Holds 351 Fords & 302's
  • Holds even the heaviest V8 engines
  • Includes one set of Ford (#FHA) or Chevy (#CHA) Arm Holders

ES2 - Flywheel Stand

  • Allows you to rotate an engine a complete 360°
  • Will adjust to hold most engines

 

Service Bench

SBR:
  • Has a spacious 8' x 2 ½' work area
  • Shelf underneath work area
  • Contains receivers for either a stern drive, small outboard or outboard power head holder on each corner
  • Back riser comes with pegboard for OEM tool layout
  • New Shop Vise Plate available!

*Since most of these products have to be shipped via Common carrier, call us for a freight quote.

20 items found
Sort By: